PACKAGE "A"

1. Main Floor System
  • - Adjustable steel telepost
  • - Built up wood main beam
  • - 5 ½" sill sealer gasket
  • - 2x6 pressure treated sill plate
  • - Wood I pre-engineered floor joist system
  • - 5/8" t&g OSB subfloor sheathing
  • - Builders shims
2. Perimeter Wall System
  • - 5 ½" base gasket
  • - High performance structural insulating panels R-25
  • - 1x3 spruce strapping @ 16" o.c.
  • - 1x8 t&g, v-joint pine exterior siding
  • - Interior non-structural timber frame accents (Main Floor only) (3"x8" Pine timber post & beam system at perimeter walls with 2" x 6" angle braces)
3. Windows and Doors
  • - White P.V.C. single hung. 3-1/4" flush frame with Low-E & Argon thermal glass, white hardware & insect screens.
  • - Steel insulated entrance systems with 4-5/8" flush frame with White PVC exterior clad frame, clear insulating glass.
4. Interior Partition Framing
  • - 2x4 (or 2x6 as required for plumbing wall) top and bottom spruce plates
  • - 2x4 (or 2x6) spruce partition studding @ 16" o.c.
5. Second Floor System
  • - Pine timber support posts
  • - Pine timber carrier beams and floor joists
  • - 5/8" t&g OSB floor sheathing
  • - 2x8 spruce rim board
6. Gable Ends
  • - 2x6 spruce framing
  • - Lintels
  • - 2-1/4 Foam insulation panels R-10
  • - 1x3 spruce strapping @ 16" o.c.
  • - 1x8 t&g, v-joint pine exterior siding * and second floor walls if applicable
7. Roof System
  • - Pre-engineered roof structure
  • - Structural beams and support posts as required
  • - ½" OSB sheathing
  • - 15 lb building paper for eaves and rakes
  • - 25 yr standard shingles
  • - Coloured metal flashings
  • - Roof vents
  • - 2x4 spruce for sub-fascia
8. Soffit
  • - Kiln-dried 5/16" x 3" t&g, v-joint pine
  • - Aluminum vent strips
9. Exterior Trim
  • - 1x4 pine window and door trim
  • - 1x6 pine fascia board
  • - 1x4 & 1x6 pine exterior corners


PACKAGE "B"

10.
Main Floor Stairs
- 2x12 pine for stringers & 2x10 for treads
- 2x4 pine for handrail and 2x2 pine for balusters
* Loft railing if applicable

11.
Basement Stairs
- 2x10 spruce stringers and 2x10 spruce treads (no railing)

12.
Interior Trim
- 1x4 pine baseboard, interior door casing
- 1x8 pine window jamb extensions
- 1x4 pine window and door casing

13.
Interior Doors
- Pre-hung hollow core embossed 6-panel colonial doors

14.
Fiberglass Insulation
- R-20 for gable ends and second floor exterior walls
- R-31 for ceilings
- Approved vapor barrier for all insulated surfaces

15.
Main Floor Covering
- 1x6 t&g pine flooring for over sub floor surface

16.
Second Floor Covering
- 1x6 t&g pine flooring for over sub floor surface



Other Options

1.
Steel Roofing
- Pre-finished residential steel roofing in a wide variety of colours, including all required matching flashing, ridge vent and fasteners.

2.
Exterior Decks, Porches and Sun Rooms
- Pressure treated lumber for deck framing, beams, decking, railings and post.

3.
Aluminium Clad Windows
- The beauty of natural pine interior and the durability of aluminium clad exterior in a wide variety of colours.